Safety & Operating Instructions - Salsco HP11 Operator And Parts Manual

Roller
Table of Contents

Advertisement

1. NEVER leave unit running while unattended.
2. NEVER park on a green for any reason.
3. NEVER go down steep hills sideways. ALWAYS approach hills straight on.
4. NEVER change your mind mid-way down a steep incline. Once you've started down a steep
incline, change direction only with the greatest of care and gentlest touch.
5. Allow engine to cool for several minutes before filling with fuel, since fuel tank is over the
engine.
NOTE: HONDA ENGINES - ALWAYS TURN OFF THE FUEL SHUTOFF, WHEN THE ENGINE IS NOT
1. Check that the unit has been serviced and all fluids are checked and topped off.
2. Check all hydraulic hose fittings.
3. Push fuel shut off switch to on position.
4. Push choke to full on position
5. Push throttle to just above idle.
6. Turn on/off switch to on position.
7. You should start engine from seat position. Just reach down to engine controls. Keep feet
off pedals. Hydrostatic drive should come to neutral when engine starts.
8. Pull rope and engine will come to life. Hydrostatic transmission should come to neutral
when engine is started. REMEMBER: RIGHT PEDAL TO GO RIGHT, LEFT PEDAL TO GO LEFT.
9. Slide choke to full off position.
10. Once unit is running at just above idle, push pedal down slowly. Unit will begin to move.
Drive it out of trailer on to grass area.
11. Since the unit is hydrostatic, engine should run at full R.P.M. and speed should be controlled
by pressure on the pedal.
O:\Manuals\G.G.R. HP11-2018\GGR_HP11_Manual_Rev.10.13.2020.doc
SAFETY INSTRUCTIONS
RUNNING, i.e. WHEN IN TRANSPORT, STORAGE, ETC.
OPERATING INSTRUCTIONS
- 6 -

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

09071

Table of Contents