STATEMENT OF FACT You have just purchased the highest quality, most dependable, Greens Roller, on the market today. This unit has the ability to meet exact standards and perform for years with minimum downtime. HOWEVER, it cannot read nor will it understand this manual no matter how long you leave it on top of the machine.
It has been and will continue to be the policy of SALSCO to update existing machines at its own discretion. Whenever possible, new designs will be made in such a way that they can be "Retro Fit" if so desired.
SAETY INSTRUCTIONS NEVER leave unit running while unattended. NEVER park on a green for any reason. NEVER go down steep hills sideways. ALWAYS approach hills straight on. NEVER change your mind mid-way down a steep incline. Once you've started down a steep incline, change direction only with the greatest of care and gentlest touch.
TROJAN, ENCLOSED IN THE MANUAL PACKAGE YOU RECEIVED WITH THE ROLLER. SAFETY IS A PRIME CONCERN AT SALSCO AND THE SAFETY DECALS ON YOUR MACHINE ARE A HIGHLY VISIBLE AND CONSTANT REMINDER TO ALL OPERATORS. REPLACEMENT SAFETY DECALS MAY BE OBTAINED BY CALLING SALSCO @ 1-800-872-5726, OR THE DEALER IN YOUR AREA.
Page 13
NOTE: THIS DRAWING PERTAINS TO UNITS WITH S/N 0383 AND UP. FOR UNITS WITH S/N 0382 AND PREVIOUS, REFER TO THE MANUAL WITH THE REVISION DATE OF 10/6/2010. “O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc...
Below is a quick reference chart for various “Flat Head Cap Screws” and the torque recommendations. VALUES ARE STATED IN FOOT POUNDS Thds Per Inch SAE Grade 5 SAE Grade 8 BOLT SIZE ¼ 5/16 7/16 ½ 9/16 ¾ O:\Manuals\E.G.R. QC 0009074\EGR_QC_0009074 _Manual PW_10.30.2017.doc...
How to install Electric Motor, Gearbox, and Final Drive These instructions must be followed EXACTLY. USE LOC-TITE, Blue 1) Install the flangette bearings to the roller frame. The flangettes should be to the outside of the frame and the bearings should have the exocentric collars towards the outside of the frame also.
DETERMINATION AS TO WHETHER THESE PARTS MUST BE RETURNED. Our Warranty Department will contact and instruct you on how to return the Parts to Salsco on an RA #. Returns MUST be made within 30-Days from issuance of RA #. FREIGHT CHARGES ON RETURN OF PARTS IS THE RESPONSIBILITY OF THE CUSTOMER.