Section 4
Starting up
IEC09000357 V1 EN-US
Figure 5:
4.
Select Obtain an IP address automatically if the parameter
the IED.
IEC09000358 V1 EN-US
Figure 6:
5.
Select Use the following IP address and define
used and if the
IP address must be different from the IP address chosen for the IED.
28
IEC09000357-1-en.vsd
Select the TCP/IP protocol and open Properties
IEC09000358-1-en.vsd
Select: Obtain an IP address automatically
IP address is not set to be obtained automatically by the IED, see
© Copyright 2011 ABB. All rights reserved
DHCPServer is set to Enabled in
IP address and Subnet mask if the front port is
1MRK 511 248-UUS A
Figure
7. The
Bay control REC650
Commissioning manual