Table of Contents
Advertisement
Operating the Air Conditioner
For remote control buttons related to each operation, see the pages at the front of this manual.
Also, for more detailed operation, visit www.samsung.com.
Inserting batteries
two 1.5V AAA type batteries
NOTE
• The descriptions in this manual are primarily made
based on the remote control buttons.
• Although Ionizer (
Reset / Display are displayed on the remote control
display, they are not available on this model.
• For the multi system Ionizer (
/ Single user / Usage / Filter Reset / Display are
displayed on the remote control display, but these
functions are not available.
Operation modes
1
You can change the current mode between Auto,
Cool, Dry, Fan, and Heat by pressing the
Controlling temperature
1
You can control the temperature in each mode as follows:
Mode
Temperature control
Auto/
Cool/
Adjust by 1 °C between 16 °C and 30 °C.
Heat
Dry
Adjust by 1 °C between 18 °C and 30 °C.
Fan
You cannot control the temperature.
12 English
) / d'light Cool / Usage / Filter
) / d'light Cool
button.
NOTE
You can use the Cool, Dry, and Heat modes in the
following conditions:
Mode
Cool
Indoor
16 °C to
temperature
32 °C
Outdoor
-10 °C to
temperature
46 °C
80% or less
Indoor
relative
humidity
humidity
• If the air conditioner operates in a high humidity
environment in the Cool mode for an extended
period of time, condensation may occur.
• If the outdoor temperature drops to -15°C, the
heating capacity may decrease to as much as 60%
to 70% of the specified capacity.
• For more information about outdoor temperature in
the multi system, refer to the manual for the multi
system.
Controlling fan speed
1
You can select the following fan speeds in each mode:
Mode
Available fan speeds
Auto/
(Auto)
Dry
Cool/
(Auto),
(Low),
Heat
(Turbo)
Fan
(Low),
(Med),
Dry
Heat
18 °C to
27 °C or
32 °C
less
-10 °C to
-15 °C to
46 °C
24 °C
_
_
(Med),
(High),
(High),
(Turbo)
Advertisement
Table of Contents
