Pivot Dual Gauge PRO User Manual

USER'S MANUAL
Thank you for purchasing this PIVOT product.
Please read this manual carefully and keep it for future
reference.
If this product is given to
Product
another user, make sure to
include this User's Manual.
Contents
Contents / WARNING / CAUTION ......... 1
Features .......................................... 1
Part Names and Display ..................... 2
Connecting The Wires ........................ 2
Installing The Product ........................ 3
Basic Operation ................................. 3
Switching The Display ........................ 4
Illumination color settings ..................... 4
Illumination brightness settings ............ 4
Troubleshooting ................................. 4
1. The display will not be proper if the ECU being used is not the standard one or if a sub-computer is being used, even
in compatible car models.
2. Cannot be used in combination with other company's products that use Diagnostic Monitoring Connectors.
3. For details about using combinations of PIVOT OBD products, see here.
Improper use or disregard of these warnings
WARNING
may result in the injury or death of people.
• Do not work in areas where there is excessive exhaust.
Due to vehicle exhaust emission poisoning or fire may result in a damage to
humans.
• Do not crush the cable.
Please be careful that the cable does not get crushed by the seat rail or car
door steel plate, nor cut by any sharp steel plate as this may cause a poor
connection or an electric short leading to fire or other danger.
• Do not operate while driving.
Operating or checking the display during driving may cause an accident;
please use with the utmost consideration for safety.
• Please securely fasten the product to a stable place and be
sure to store bundle away all wires with tape, etc...
It is very dangerous to pull tangled wires by force or allow tangled wires to
interfere with driving.
Features
Our specialized communication analyzer makes it possible to display BOOST data of MAZDA SKYACTIV-D.
Easy Installation
Simple coupler connection to Diagnostic monitor connector.
Dual Display
Indicator needle and digital display provide easy viewing of
multi-data.
Black Titanium Bezel
High quality black titanium bezel.
＋
Please check the contents of the package
Meter Unit
Screw Nut
Wrench
Meter Holder included
The included full cover type holder allows seamless installation to a number
of places.
2-Color Illumination Switch with 3-step Dimmer
Illumination switch allows selection between two colors and brightness
adjusted with three-step dimmer.
Peak Hold
Save and display each peak reading after engine starts.
Designed for MAZDA SKYACTIV-D
OBD Cable
Gauge Cable
with Fuse 3A
Allen Double-sided Cushion
Tape Tape
⇒ http://pivotjp.com/obd/
Improper use or disregard of these warnings may cause
CAUTION
injury to persons, damage the product and other things.
•This product is for DC12V cars;
Installation cannot be carried out on cars with other voltage batteries.
• Just after installation do not exert any strong force on the product.
When double-sided tape is used for an installation be warned that when hot the tape
temporarily losses adhesiveness.
• Do Not Use Chemical Cleansers.
If the unit gets dirty please wipe with a soft cloth to remove any dirt. Do not use chemical
cleansers such as thinner, benzene, or alcohol.
• Do not install the product in any place subject to high temperature or
any place where water may be splashed.
• Make sure to replace all screws and parts to their original place.
• Do not install the product in a place where it will cause distraction.
• Do not, in any manner, process, take apart, or make changes to this
product.
(DPB-M As of September, 2020 No.3)
Easy Installation
DPB-M
BOOST＋DIGITAL
A-Pillar
IGN Cable
Meter Holder
Stand
with Fuse 3A
Cut Zip Ties User's
Connectors (Large) × 2 Manual
× 2 (Small) × 5 (This Book)
1