auna 10032299 Manual page 86

6. Mantenga pulsado el botón
WPS situado en la parte
superior del altavoz. Puse
el botón "siguiente" para
continuar".
< <
PRESS TO ENTER SETUP M... PRESS TO ENTER SETUP M...
2 Press and hold the WPS key on 2 Press and hold the WPS key on
device to put the device into device to put the device into
network setup mode. Then click network setup mode. Then click
the "Next" button to continue. the "Next" button to continue.
Next Next
8. En cuanto el altavoz se haya
conectado satisfactoriamente
a la red, el indicador de modo
permanecerá encendido..
CONNECTED
Device is connected to XXXX
successfully
Current Wi-Fi strength of device:100%
Next
7. Durante el proceso de
conexión se le darán
indicaciones verbales.
< <
PLEASE WAIT PLEASE WAIT
3 3
Wait for device to be connected Wait for device to be connected
to Wi-Fi... to Wi-Fi...
Do not operate the device during Wi-Fi Do not operate the device during Wi-Fi
setup. Please wait for completion of setup. Please wait for completion of
setup patiently. It's usually finished in setup patiently. It's usually finished in
60 seconds. 60 seconds.
Cancel Cancel
If you hear voice prompt for erro message. If you hear voice prompt for erro message.
please go back and retry please go back and retry
Indicación 1:
Si la conexión se interrumpe,
aparecerá la siguiente página.
Pulse el botón "cancelar" para
conectarse de nuevo a la red.
WI-FI SETUP TIMEOUT
UH OH!
Try Next to try an alternate way of
connecting.
Next
Cancel Setup
ES
87