auna 10032299 Manual page 62

6. Appuyez sur la touche
WPS sur le haut de
l'enceinte, et maintenez-la.
Pour continuer, appuyez sur
la touche "suivant.
< <
PRESS TO ENTER SETUP M... PRESS TO ENTER SETUP M...
2 Press and hold the WPS key on 2 Press and hold the WPS key on
device to put the device into device to put the device into
network setup mode. Then click network setup mode. Then click
the "Next" button to continue. the "Next" button to continue.
Next Next
8. Une fois l'enceinte connectée
au réseau, l'indicateur de
mode reste allumé.
CONNECTED
Device is connected to XXXX
successfully
Current Wi-Fi strength of device:100%
Next
7. Vous recevez des
indications vocales pendant
le processus de connexion.
< <
PLEASE WAIT PLEASE WAIT
3 3
Wait for device to be connected Wait for device to be connected
to Wi-Fi... to Wi-Fi...
Do not operate the device during Wi-Fi Do not operate the device during Wi-Fi
setup. Please wait for completion of setup. Please wait for completion of
setup patiently. It's usually finished in setup patiently. It's usually finished in
60 seconds. 60 seconds.
Cancel Cancel
If you hear voice prompt for erro message. If you hear voice prompt for erro message.
please go back and retry please go back and retry
Remarque 1: Si la connexion
s'interrompt, la page suivante
apparaît. Appuyez sur la touche
"'annuler" pour vous reconnecter
au réseau.
WI-FI SETUP TIMEOUT
UH OH!
Try Next to try an alternate way of
connecting.
Next
Cancel Setup
FR
63