auna 10032299 Manual page 110

6. Tenere premuto il tasto
WPS. Premere "Avanti" per
proseguire.
< <
PRESS TO ENTER SETUP M... PRESS TO ENTER SETUP M...
2 Press and hold the WPS key on 2 Press and hold the WPS key on
device to put the device into device to put the device into
network setup mode. Then click network setup mode. Then click
the "Next" button to continue. the "Next" button to continue.
Next Next
8. Non appena l'altoparlante
è connesso con la rete,
l'indicazione Modalità resta
illuminata.
CONNECTED
Device is connected to XXXX
successfully
Current Wi-Fi strength of device:100%
Next
7. Vengono fornite istruzioni
vocali durante la procedura
di collegamento
< <
PLEASE WAIT PLEASE WAIT
3 3
Wait for device to be connected Wait for device to be connected
to Wi-Fi... to Wi-Fi...
Do not operate the device during Wi-Fi Do not operate the device during Wi-Fi
setup. Please wait for completion of setup. Please wait for completion of
setup patiently. It's usually finished in setup patiently. It's usually finished in
60 seconds. 60 seconds.
Cancel Cancel
If you hear voice prompt for erro message. If you hear voice prompt for erro message.
please go back and retry please go back and retry
Avvertenza 1:
quando la connessione
viene interrotta, compare la
seguente schermata. Premere
"Interrompere" per connettersi
nuovamente alla rete.
WI-FI SETUP TIMEOUT
UH OH!
Try Next to try an alternate way of
connecting.
Next
Cancel Setup
IT
111