Cleaning & Maintenance - NAUSICAA WAYUP 5 Series User Manual

Stand-up lift
Hide thumbs Also See for WAYUP 5 Series:
Table of Contents

Advertisement

Cleaning & Maintenance
BEFORE ANY HANDLING:
• Disconnect the AC power cord.
• Check that all electrical components are connected to each other.
CLEANING PROCESS:
• Clean the surfaces with a wet cloth by using an apropriate detergent.
• A regular cleaning is recommanded.
DAILY MAINTENANCE:
• By means of a product applied on the surface in one operation.
• After the patient's discharge by respecting the following operation:
- Cleaning is carried out by means of a cloth impregnated with a disinfectant solution
surface.
• Maintenance by specific service providers after removal of the stand-up lift from the
facility:
- Biological cleaning operation
- Steam cleaning of various flat surfaces. Change surfaces regularly when washing to
avoid water load. Steam cleaning of inaccessible areas. For tubes, steam use with a
microfiber mop. Do not direct steam directly on the electrical boxes.
MONTHLY MAINTENANCE:
• Check that the device does not present any visible damages.
• Check that no part is missing.
• Check the good functioning of the castors and that no matter prevents their bearing.
• Check the good fonctioning of the commands as well as the connections of the
remote control and the actuator on the battery.
• Clean the sockets and the commands buttons with a dry cloth, if needed with a wet
cloth.
• Check the good state of the electric cables.
CAUTION:
• Disinfection of actuators, electrical boxes and handsets with a microfiber cloth impre-
gnated with disinfectant.
If you notice a fault, contact the S.A.V.
Verticalisateurs & Lève-Personnes
Téléphone : 04 66 71 71 80
Fax : 04 66 71 71 81
Mail : sav@nausicaa-medical.com
User Manual - Stand-Up Lift: WAYUP 5 Range
Manufactured by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
19

Advertisement

Table of Contents
loading

Table of Contents