Assembly Extempore Sunbed Maintenance - Extremis EXTEMPORE CHAIR Assembly Instructions, How To Use, Useful Tips For Keeping Your Tool For Togetherness In Shape

ASSEMBLY EXTEMPORE SUNBED
WHAT YOU NEED
2 people
no. 13 spanner
no. 4 hex key
+/- 15 min.
2. Insert the 4 assembly rods in the holes provided to that
end in the corner elements. Tighten the rods by means
of the 4 bolts using a no. 13 key. Do not tighten the
bolts too much as this could cause them to break.
WARNING: USE OF THE SUNBED
Be careful your fingers do not get jammed between the
support and the aluminium frame when modifying the
head and footrest. To change the position of the head
or footrest, you only need to slightly raise the head
or footrest and move the support. Put the support in
the lowest cut-aways to put the head or footrest in its
horizontal position.
4 assembly extempore sunbed + maintenance
1. Put the tabletop on the ground upside down (the
wooden surface should face the ground). Use the
packing material to protect the surface.
3. Now the legs can be put onto the four corner elements.
The legs can be fixed by tightening the 2 little screws
on each leg with the socket-screw key. Turn it around.
All done!