Electrolux FI5004NA+ User Manual page 6

Hide thumbs Also See for FI5004NA+:
Table of Contents

Advertisement

Available languages

Available languages

6
www.electrolux.com
3.2 Switching on
1. Insert the plug into the wall socket.
2. Press the ON/OFF switch.
The Pilot Light will light up.
3.3 Switching off
The freezer is shut off by pressing
ON/OFF switch until the Pilot light and
the Temperature indicator switched off.
3.4 Temperature regulation
The temperature can be adjusted
between -15°C and -24°C.
By pressing the Temperature regulators ,
the current temperature setting flashes
on the Temperature indicator. It is
possible to modify the setting
temperature only with flashed indicator.
In order to set a warmer temperature, it is
necessary to press warmest
Temperature regulator. To set a colder
temperature-coldest Temperature
regulator. The Temperature indicator
displays the newly selected temperature
for a few seconds and then shows again
the inside compartment temperature.
The newly selected-temperature must be
reached after 24 hours.
During the stability period by
the first starting the
temperature displayed can
not correspond to the setting
temperature.
3.5 Temperature indicator
During normal functioning the
Temperature indicator shows the
temperature inside the freezer.
3.8 Fridge Control panel
1. Pilot light
2. ON/OFF switch
3. Temperature regulator (warmest)
The difference between the
temperature displayed and
temperature setting is
normal, especially when:
• a new setting has
recently been selected
• the door has been left
open for a long time
• warm food has been
placed in the
compartment.
3.6 High temperature alarm
In the event of the abnormal temperature
rise inside the freezer (e.g. power cut)
Alarm light will start to flash and a buzzer
will sound.
After the temperature has returned to
normal, the Alarm light will continue to
flash, although the buzzer has stopped.
When the Alarm reset switch is pressed,
the warmest temperature reached in the
compartment flashes on the
Temperature indicator.
3.7 FastFreeze function
You can activate the FastFreeze function
by pressing the FastFreeze switch.
TheFastFreeze light will light up.
This function stops
automatically after 52 hours.
It is possible to deactivate
the function at any time by
pressing FastFreeze switch.
The FastFreeze light will
switch off.
1
2
3
4
5
4. Temperature indicator
5. Temperature regulator (coldest)
6. Shopping light
6
7
8
9

Advertisement

Table of Contents
loading

Table of Contents