Hartan VIP Instructions Manual page 21

Automatic lock for upper section 17
Place the stroller unit or carrycot upon the
chassis in a way that the openings of the
handles fit the locking studs. The two locks
engage by pressing lightly, which
is indicated by a click sound. Check by
lifting the carriage top to make sure
the two locks are engaged securely.
To remove the carriage tops, depress
the two red lock levers in the respective
handle at the same time, and take off
the carriage tops.
Carrying and folding the carriage
The carrying bar 24 is suitable for carrying
the folding carrycot. Make sure the carry-
ing bar is correctly engaged in carrying
position. To fold the bar back, depress the
red safety button 22 and place the bar
back, which can be done in several steps.
The folding carrycot can be folded up flat,
to cram it in the boot. Fold the fixing clips
26 down onto the floor of the carrier. Fold
the four tensioners 23, located at the sides
under the inner
lining, inwards.
To prepare it for use, press the tensioners
23 outwards until they click into place.
To avoid a build-up of heat, you can open
the hood flap 10 by opening the zippers
and securing the hood flap under the strap
with the Velcro band.
Instructions for use Instructions for use
22
26
23
17