Table of Contents
Advertisement
2. Product Introduction
2-1 Language Distributor // IT-12M4
COMBO socket microphone input: This COMBO socket provides +48V Phantom
1
power to a microphone with balanced XLR or unbalanced φ6.3 connector. The input
signal will be mixed with the Original (CH0).
Gain: Adjust input sensitivity of the COMBO socket. The adjustable range is ±10dB.
2
Interpreter channel indicator: Light-On to indicate the correspondent channel is active.
3
Flashing to indicate the correspondent channel is standby.
Signal level indicator: the brightness of this LED indicates the signal level of the correspon-
4
dent channel.
Power Switch: Push the"│" on this switch will be turn system on, and push the"○" on
5
this switch will turn system off.
DC power input: To connected the 12V /1A power adapter that included in package of
6
IT-12M4 from JTS . Don't used other spec power adapter insead.
Interpreter console interface (D-sub 25pin socket):3 interpreter consoles can be
7
connected in daisy chain (IT-12D).
Record IN connector (RCA): external signal from play back devices will be mixed with
8
the Original (CH0) for recording.
Record output connector (RCA): Connect to recording equipment. The original signal
9
(CH0) mixed with REC. IN will be recorded.
Original (CH0, floor channel) output (RCAx2/symmetrical output) : Original (CH0)
10
balanced output with RCA connecters.
2
INTERPRETATION SYSTEM
1
2
3
4
IT-12M4
7
8 10
INTERPRETER'S CONSOLE
DC15V
500mA
6
9 10
5
11
ORIGINAL INPUT
SLOW
GND
ALARM
OUT
IN
12 13 14 15 16
11
Advertisement
Table of Contents
