Steps
1. Align and place the touchpad into the slot on the palm-rest and keyboard assembly.
2. Replace the four (M2x2) screws and adhere the tapes that secure the touchpad to the palm-rest and keyboard assembly.
3. Align and place the touchpad bracket into the slot on the palm-rest and keyboard assembly.
4. Replace the three (M2x2) screws that secure the touchpad bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the
system
board.
2. Install the
power-adapter
3. Install the
display
assembly.
4. Install the
right
fan.
5. Install the
left
fan.
6. Install the
wireless
card.
7. Install the
memory
modules.
8. Install the battery.
9. Install the
base
cover.
10. Follow the procedure in
Palm-rest and keyboard assembly
Removing the palm-rest and keyboard assembly
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
memory
modules.
5. Remove the
wireless
card.
6. Remove the
left
fan.
7. Remove the
right
fan.
50
Removing and installing components
port.
After working inside your
computer.
Before working inside your
computer.