Resetting BOOKMAN
If the keyboard fails to respond, or if the
screen performs erratically, first press
and then press
CLEAR
nothing happens, follow the steps below
to reset it.
Warning: Pressing the reset button
with more than light pressure may per-
manently disable your BOOKMAN.
Also, resetting BOOKMAN erases set-
tings and information entered in its built-
in book and in an installed cartridge.
1. Hold
CLEAR
If nothing happens, try Step 2.
2. Use a paper clip to gently press
the BOOKMAN's reset button.
The reset button is recessed in a
pin-sized hole on the back of the
BOOKMAN. Look for it on the bat-
tery cover or near the cartridge slot.
Troubleshooting Tips
• Make sure your cartridge, if any,
is installed correctly.
• Check that the cartridge's metal
contacts are dirt- and dust-free.
twice. If
ON/OFF
and press
ON/OFF
Cartridge Care
• Do not damage the contacts
on the cartridges or slot.
Caution: Touching these electrical
contacts with statically charged ob-
jects, including your fingers, could
erase information entered in a car-
tridge or built-in book.
.
• Do not put excessive pressure
on the cartridges.
• Do not expose the cartridges
to heat, cold, or liquids.
15