Steps
1. Align the notch on the wireless card with the tab on the wireless-card slot.
2. Slide the wireless card at an angle into the wireless-card slot.
3. Connect the antenna cables to the wireless card.
4. Slide and place the wireless-card bracket on the wireless card.
5. Replace the single (M2x3) screw that secures the wireless card to the system board.
Next steps
1. Install the
right-side
cover.
2. Follow the procedure in
Graphics card
Removing the graphics card
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
19