3. Slide the hard-drive assembly into the hard-drive cage until it snaps into place.
4. Connect the data cable and power cable to the hard drive.
Next steps
1. Install the
right-side
cover.
2. Follow the procedure in
Removing the 3.5-inch hard drive
Prerequisites
1. Follow the procedure in
2. Remove the
right-side
cover.
About this task
The following images indicate the location of the 3.5-inch hard drive and provide a visual representation of the removal procedure.
After working inside your
computer.
Before working inside your
computer.
Disassembly and reassembly
25