Table of Contents
Advertisement
Using the product
How to fit jar to main unit
Carefully insert the jar on top of the main
unit. Ensure that the lock of the jar fits into
the slot of the main unit. Rotate the jar
clockwise until it locks and use the handle
to lock.
How to tighten blade
Hold the coupler on the underside of the jar
and with the spatula, tighten by rotating in
an anti-clockwise direction.
tighten
Safety systems
The Bosch TrueMixx Mixer Grinder is
fitted with an overload protector (OFF)
mechanism to prevent the motor burning
out due to overloading. In case of excess
loading with ingredients in the jar, very
thick paste or low voltage conditions, your
Bosch mixer grinder automatically switches
off and the red knob on the bottom of the
mixer grinder will spring out. If this happens,
switch off your mixer grinder and remove
the excess ingredients. Add sufficient water
if dealing with thick paste and wait for
2-3 minutes. Press the red reset button and
start the mixer grinder again.
Operating your mixer
grinder
Before using for the first time /
using after a long time
■ Before using the mixer grinder for the
first time or using it after a long time,
thoroughly clean all the parts that come
into contact with food ingredients.
■ Rotate the motor shaft by hand via the
motor coupler, on top of the main unit.
The motor shaft should rotate freely.
■ Check that the speed selector is in the
OFF position.
■ Place the main unit on a smooth, stable
and clean surface.
W Caution!
Never place plastic, paper or cloth under
the mixer grinder as it may block the
ventilation holes.
Using the product
en
5
Advertisement
Table of Contents
