Table of Contents
Advertisement
Pure-15AS 15" Subwoofer with DSP
Back
01) LCD display
02) Combo 3-pin XLR/6,3 mm jack connector, INPUT 1
Connect a line level device or a microphone.
03) Combo 3-pin XLR/6,3 mm jack connector, INPUT 2
Connect a line level device or a microphone.
04) Cooling fan
05) Power switch ON/OFF
06) Voltage selector
Move the switch to select the desired voltage, 120 V or 230 V.
Make sure that the available voltage is not higher/lower than the option selected with this switch.
07) Ground/earth connection
08) Fuse T5L/250V
09) Pro power connector (Blue) IN
10) Pro power connector (Gray) THROUGH
11) Gain control, INPUT 2
Turn the control to set gain for input 2.
12) LIFT/GND selector, INPUT 2
Press the button to eliminate unwanted hum or buzz, caused by ground loops.
13) 3-pin XLR connector, LINK 2
Connect a speaker.
Order code: D3726
7
Fig. 02
Advertisement
Table of Contents
