Overview
2
Port lane switch button (used for the bottom 36
ports)
3
Port lane LEDs
4
72 40-Gigabit QSFP+ (optical) ports supporting
1-, 10-, and 40-Gigabit speeds to other devices
(ports 37 to 71 support
40-Gigabit-to-4X10-Gigabit breakout cables).
To determine which transceivers, adapters, and cables are supported by this switch, see the
Modules Compatibility Information
The following figure shows the hardware features seen from the power supply side of the chassis.
1
2
3
6
7
document.
Screw holes (2) for
6
attaching the grounding
lug to both sides of the
chassis.
Notch in both sides of the
7
chassis for locking the fan
side of the chassis to the
bottom-support rails.
2 power supplies (one
8
used for operations and
one used for redundancy)
with power supply slot 1
on the left and slot 2 on
the right (AC power
supplies shown).
Cisco Nexus 9272Q NX-OS Mode Switch Hardware Installation Guide
Screw holes (4) for attaching a center-mount rack
bracket for 2-post racks (1 bracket for each of 2
sides)
Notch in both sides of the chassis for locking the
power supply end of the chassis to the
bottom-support rails
Management ports (2
—RJ-45 and SFP)
Chassis LEDs include the
following:
• Beacon (BCN)
• Status (STS)
USB port (1)
Overview
Cisco Transceiver
3