Cisco Nexus 9272Q Hardware Installation Manual page 12

Nx-os mode switch
Hide thumbs Also See for Nexus 9272Q:
Table of Contents

Advertisement

Overview
• 1200-W port-side intake AC power supply with NEBS compliance with red coloring
• 1200-W port-side exhaust AC power supply with NEBS compliance with blue coloring
• 1200-W HVAC/HVDC dual-direction airflow power supply with white coloring (N9K-PUV-1200W)
• 930-W port-side intake DC power supply with green coloring (UCSC-PSU-930WDC)
• 930-W port-side exhaust DC power supply with gray coloring (UCS-PSU-6332-DC)
• 930-W port-side intake DC power supply with burgundy coloring (NXA-PDC-930W-PI)
• 930-W port-side exhaust DC power supply with blue coloring (NXA-PDC-930W-PE)
Note
Both power supplies should be the same type. Do not mix AC, DC, or HVAC/HVDC power supplies.
Note
All fan modules and power supplies must use the same airflow direction during operations. If you are using
the 1200-W HVAC/HVDC power supplies, those power supplies automatically use the same airflow direction
as used by the other modules in the switch.
The following figure shows the hardware features seen from the port side of the chassis.
1
Chassis LEDs
• Beacon (BCN)
• Status (STS)
• Environment (ENV)
Cisco Nexus 9272Q NX-OS Mode Switch Hardware Installation Guide
2
(NXA-PAC-1200W-PI)
(NXA-PAC-1200W-PE)
5
Screw holes (2) for attaching a front-mount
bracket for 4-post racks (1 bracket on each of 2
sides)
Overview

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexus n9k-c9272q

Table of Contents