Advertisement
Quick Links
Your satisfaction is important to us, please let us help!
If you have any questions or concerns during the installation, our support representa-
tives are available to assist you.
Please call: 1-877-769-3765 or Live Chat at www.raptorseries.com
If you have damaged or missing parts please contact the company you purchased the
product from and notify them of the issue right away.
CAUTION: Do not install damaged parts!!!
Raptor Series Truck Accessories | P:877.769.3765 | F: 877.875.7446 | E: sales@raptorseries.com
Advertisement
Related Manuals for Raptor Series MAGNUM RT Series
Summary of Contents for Raptor Series MAGNUM RT Series
- Page 1 If you have damaged or missing parts please contact the company you purchased the product from and notify them of the issue right away. CAUTION: Do not install damaged parts!!! Raptor Series Truck Accessories | P:877.769.3765 | F: 877.875.7446 | E: sales@raptorseries.com...
- Page 2 In the event that you need to ship your part back to return/exchange, please ship to the warehouse below: CYC Returns Warehouse 2415 Cathy Lane Jasper, IN 47546 Raptor Series Truck Accessories | P:877.769.3765 | F: 877.875.7446 | E: sales@raptorseries.com...
-
Page 3: Limited Lifetime Warranty
Raptor Series Warranty LIMITED TEN (10) YEAR WARRANTY For Powder Coated Steel Products CYC Engineering, Inc. guarantees the original purchaser of our products a limited ten (10) year warranty from the date of original purchase against manufacturer defects in materials, workmanship and finish under normal use. - Page 4 Rev 1 RTS73TY/RTS80TY MAGNUM RT STEPS Components: Hardware: RTSPN175 M8 x 30 mm Hex Head Bolts Bolt/Nut Plates Qty 24 Qty 8 M8 Plastic M8 Hex Head Push Nuts Nuts Passenger Driver Side Qty 8 Qty 8 Side Step Bar Step Bar Qty 1 Qty 1...
- Page 5 Rev 1 Align brackets with existing factory threaded holes in the rocker panel (4a). These holes may have black plugs in them that will need to be removed before installation. Fasten each bracket to the rocker panel using two (2) M8 x 30mm Hex Head Bolts, two (2) M8 Lock Washers and two (2) M8 Flat Washers (4b) per bracket. F r o ROCKER PANEL...
- Page 6 Rev 1 Installing the Step Bar RTSPN175 BOLT/NUT PLATE Line up mounting points on MOUNTING BRACKET the step bar with the mounting M8 FLAT holes in each bracket. WASHER M8 LOCK Fasten the step bar to each WASHER bracket using one (1) RTSPN175 Bolt/Nut Plate, one (1) Plastic Push Nut, one (1) M8 Hex Head Nut, two (2) M8 Lock Washers,...