Summary of Contents for Raptor Series MAGNUM RT Series
Page 1
If you have damaged or missing parts please contact the company you purchased the product from and notify them of the issue right away. CAUTION: Do not install damaged parts!!! Raptor Series Truck Accessories | P:877.769.3765 | F: 877.875.7446 | E: sales@raptorseries.com...
Page 2
In the event that you need to ship your part back to return/exchange, please ship to the warehouse below: CYC Returns Warehouse 2415 Cathy Lane Jasper, IN 47546 Raptor Series Truck Accessories | P:877.769.3765 | F: 877.875.7446 | E: sales@raptorseries.com...
Raptor Series Warranty LIMITED TEN (10) YEAR WARRANTY For Powder Coated Steel Products CYC Engineering, Inc. guarantees the original purchaser of our products a limited ten (10) year warranty from the date of original purchase against manufacturer defects in materials, workmanship and finish under normal use.
Page 4
Rev 1 RTS64FD/RTS81FD MAGNUM RT STEPS Components: Hardware: M8 x 30 mm RTSPN175 Hex Head Bolts Bolt/Nut Plates Qty 18 Qty 6 M8 Plastic M8 Hex Head Push Nuts Nuts Qty 6 Qty 12 M8 Flat Passenger Driver Side Washers Side Step Bar Step Bar Qty 30...
Page 5
Rev 1 Note: When installing the brackets and bars, all hardware must be left loose until all the items are attached. Remove all contents from the package and check steps for any damage. Also, verify that all components and hardware listed above are included before you begin installation. Remove the black tape and large rubber grommets over the mounting holes located on the inside face of the rocker panel.
Page 6
Rev 1 Install U Nut Clips so that the U-NUT threads are to the inside of the rocker panel. Be careful not to drop the U Nut Clips inside of the rocker panel. On the driver side of the vehicle, align Mounting Brackets as shown.
Page 7
Rev 1 Installing the Step Bar RTSPN175 MOUNTING BOLT/NUT PLATE BRACKET Line up mounting points on the step bar with the mounting M8 FLAT WASHER holes in each bracket. M8 LOCK WASHER Fasten the step bar to each bracket using one (1) RTSPN175 Bolt/Nut Plate, one (1) Plastic Push Nut, one (1) M8 Hex Head Nut, two (2) M8 Lock Washers,...