Advertisement
2
110 VCO/VCF/VCA
Installation
The necessary screws are included with the module for mounting
in a Eurorack case. Connect the power cable before mounting.
Depending on the rack case, there may be a series of fixed holes
spaced 2 HP apart along the length of the case, or a track that
allows individual threaded plates to slide along the length
of the case. The free-moving threaded plates allow precise
positioning of the module, but each plate should be positioned in
the approximate relation to the mounting holes in your module
before attaching the screws.
Hold the module against the Eurorack rails so that each of the
mounting holes are aligned with a threaded rail or threaded
plate. Attach the screws part way to start, which will allow
small adjustments to the positioning while you get them all
aligned. After the final position has been established, tighten the
screws down.
Specifications
Inputs
Pulse width mod
Type
Impedance
Maximum input level
Signal input
Type
Impedance
Max input level
VCO mod input
Type
Impedance
CV range
VCF mod input
Type
Impedance
CV range
VCA mod input
Type
Impedance
CV range
3.5 mm TS jack, DC coupled
>70 kΩ, unbalanced
0 V to +10 V, 4% per volt
4 x 3.5 mm TS jacks,
AC coupled
>50 kΩ, unbalanced
+17 dBu @ unity gain
2 x 3.5 mm TS jacks,
summed
>50 kΩ, unbalanced
0 V to +10 V, 1 V/oct
2 x 3.5 mm TS jacks,
summed
>50 kΩ, unbalanced
0 V to +10 V, 1 V/oct
2 x 3.5 mm TS jacks,
summed
>50 kΩ, unbalanced
0 V to +10 V, typically 1 V
per 10 dB
Outputs
VCO output
Type
Impedance
Max output level
Frequency range with no
external CV
Frequency range using
external CV
VCA output
Type
High impedance
Low impedance
High max output level
Low max output level
High output noise
Low output noise
Controls
Pulse width manual
Waveform
Range
Pitch
Cutoff frequency
Resonance
Sig in level
Mod in level
VCA initial gain
Power
Power supply
Current draw
Physical
Dimensions
Rack units
Weight
3.5 mm TS jack, DC coupled
1 kΩ, unbalanced
10 V p-p
<10 Hz to 500 Hz
<1 Hz to 30 kHz
2 x 3.5 mm TS jacks, AC
coupled
1 kΩ, unbalanced
3 kΩ, unbalanced
+18 dBu
-2 dBu
<-60 dBu, 22 Hz -22 kHz
<-80 dBu, 22 Hz -22 kHz
50% to min
Triangle, sawtooth, pulse
32', 16', 8', 4', 2'
2 octave range
20 Hz to 20 kHz
Off to self oscillation
-∞ to unity gain
-∞ to unity gain
-∞ to unity gain
Eurorack
80 mA (+12 V), 50 mA
(-12 V)
81 x 129 x 46 mm
(3.2 x 5.1 x 1.8")
16 HP
0.19 kg (0.42 lbs)
Advertisement
