YZ Systems DynaPak 2010FKNX Manual page 22

22
12. Troubleshooting - Timer Mode
12.4 Timer Range Setting
2. Z-65/6.03 Range Setting:
a. x.x minutes: set the configuration jumper to the
far left position (factory setting).
b. .xx minutes: set the configuration jumper to the
center position.
Note: To obtain maximum battery life, choose the
longest solenoid stroke rate possible.
(CEVQT[
/WVWCN
5[UVGO
4463:/.
(CEVQT[
/WVWCN
5[UVGO
4463:/.
Jumper switch location
for .1 - 9.9 counts (x.x)
factory positioned
Jumper switch location
for .03 - .99 counts (.xx)