Table of Contents
Advertisement
Figure 1:
(1) The power status indicator.
LED Indicator
Off
Green
Flashing green
Flashing green then turns off
Flashing orange
Network Link Status Indicators
When the recorder is connected to the network, the recorder's connection status LEDs above the Ethernet
port display the recorder's connection status to the network. The following table describes what the LEDs
indicate:
Figure 2:
(1) Link LED. (2) Connection activity LED.
LED Indicator
Off
Link LED — green
Connection Activity LED — blinking
green
Link LED — orange
Connection Activity LED — blinking
green
Link LED — green
Connection Activity LED — off
Link LED — orange
Network Link Status Indicators
Description
Power is not connected.
Power is supplied.
The firmware update is being applied to the power supply unit.
The redundant power supply is mismatched. This only occurs if
you have a secondary redundant power supply installed.
There is a problem with the power supply.
Description
The recorder is not connected to a network.
The recorder is connected to a network at the maximum port
speed.
The recorder is connected to a network at less than the
maximum port speed.
The recorder is connected to a network at the maximum port
speed and data is not being sent or received.
The recorder is connected to a network at less than the
14
Advertisement
Table of Contents
