Activation, Disactivation And Partial Activation - AVE Domoalarm AF922RF Manual

Activation, disactivation and partial activation

Full activation
Partial activation
Disactivation
The system is active following up the exit time set upon performing installation ( default 60s ). Visual and sound
confirmation is given by the buzzer seated on the control panel and can be repeated by some sounders, if any.
This function is useful to check the operations carried out with remote controls from outside. Any alarm in progress
is silenced by switch-off
Note: - After a switch-on and a switch-off, function or failure signals may occur, check what happened by referring
to the event history file;
When the control-panel or detectors battery are discharge, the fault signal is activated;
AF922RF
Insert the user
ESC
followed by
confirm 
Insert the user
followed by ESC, select the
zones to be included by
pressing 1,2,3 check the
display and confirm the
chosen configuration with
Insert the user code and
press CANC
AF940R
Press the red button
code
and
Press the red-black button
code
Note: Only zones A and B are
included
Press the green button
42
AF978R
Insert the code and press
the red button
Insert the user code, select
the zones to be excluded
by pressing A, B, C
confirm by pressing the red
button
Insert the user code and
press the green button
and