Download Print this page
Watts 757a Series Manual

Watts 757a Series Manual

Double check valve assemblies, double check detector assemblies.

Advertisement

Quick Links

Series 757a/757aDCDA
Double Check Valve Assemblies
Double Check Detector Assemblies
1
Sizes: 2
" – 6" (65 – 150mm)
2
• Installation
• Service
• Repair Kits
• Maintenance
For field testing procedure, send for IS-TK-DL, IS-TK-9A,
IS-TK-99E and IS-TK-99D.
For other repair kits and service parts, send for PL-RP-BPD
and F-RK-DC.
For technical assistance, contact your local Watts representative.
Inquire with governing authorities for local installa-
IMPORTANT:
tion requirements.
NOTE: For Australia and New Zealand: Pipeline strainers
should be installed between the upstream shutoff valve and the
inlet of the backflow preventer.
Its important that this assembly be tested periodically in com-
pliance with local codes, but at least once per year or more as
service conditions warrant. If installed on a fire sprinkler sys-
tem, all mechanical checks, such as alarm checks and back-
flow preventers, should be flow tested and inspected internally
in accordance with NFPA 13 and NFPA 25.
Watts 757a OSY
Limited Warranty: Watts Regulator Company warrants each product to be free from
defects in material and workmanship under normal usage for a period of one year from
the date of original shipment. In the event of such defects within the warranty period, the
Company will, at its option, replace or recondition the product without charge. This shall
constitute the sole and exclusive remedy for breach of warranty, and the Company shall
not be responsible for any incidental, special or consequential damages, including without
limitation, lost profits or the cost of repairing or replacing other property which is dam-
aged if this product does not work properly, other costs resulting from labor charges,
delays, vandalism, negligence, fouling caused by foreign material, damage from adverse
water conditions, chemical, or any other circumstances over which the Company has no
control. This warranty shall be invalidated by any abuse, misuse, misapplication or
improper installation of the product. THIS WARRANTY IS IN LIEU OF ALL OTHER WAR-
RANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Any implied warranties that
are imposed by law are limited in duration to one year.
Some States do not allow limitations on how long an implied warranty lasts, and some
States do not allow the exclusion or limitation of incidental or consequential damages.
Therefore the above limitations may not apply to you. This Limited Warranty gives you
specific legal rights, and you may have other rights that vary from State to State. You
should consult applicable state laws to determine your rights.
RP/IS-757a/757aDCDA

Advertisement

loading

Summary of Contents for Watts 757a Series

  • Page 1 For technical assistance, contact your local Watts representative. Watts 757a OSY Limited Warranty: Watts Regulator Company warrants each product to be free from defects in material and workmanship under normal usage for a period of one year from the date of original shipment. In the event of such defects within the warranty period, the Company will, at its option, replace or recondition the product without charge.
  • Page 2 Figure D Figure E Figure F Prior to servicing any Watts valve, it is mandatory to shut down 6. To clean or inspect either check module, insert a #3 screw- the water system by closing both the inlet and outlet shutoff driver through the downstream side of the check module as valves.
  • Page 3 Test Procedures Double Check Valve Assemblies Test Check Valve No.1 Ball Type Test Valves Step 1: Ensure shutoff #1 is open, shutoff #2 is closed. Step 2: Connect high side hose to test cock #3, low side to test cock #2 and open both test cock #2 and test cock #3.
  • Page 4 Kit consists of: Closure sleeve, 2 pieces of sleeve O-ring Kit consists of: Second check module, Check module O-ring, Disc elastomer Watts USA Website: www.wattsreg.com • Watts Canada Website: www.wattscda.com RP/IS-757a/757aDCDA 0230 EDP# 1915344 © Watts Regulator Co., 2002 Printed in U.S.A.

This manual is also suitable for:

757adcda series757a osy