UltraLite ULF200CW User Manual page 5

DIFFUSION
Diffusion is an asymmetric LED projector.
Ÿ
Do not switch the appliance on if there is a serious temperature difference such as
Ÿ
after transportation
because it could damage the light due to changes in the environment. So be sure to
Ÿ
use the appliance until it is at normal temperature.
This light should be far from strong shaking during any transport or movement.
Ÿ
Do not expose the appliance to overheating, humidity or the environment with too
Ÿ
much dust during installation. IS do not lay power cables on the floor. Or it may
cause an electronic shock to people. Make sure the installation location is in a safe
condition before installing the equipment.
Make sure to put the safety chain in place and check if the screws are screwed
Ÿ
correctly during device installation.
Ensure that the appliance is operated by qualified personnel who know the
Ÿ
appliance before use.
Keep the original packaging if a second shipment is required.
Ÿ
Do not try to change the projectors without any instruction from the manufacturer or
Ÿ
repair appointed agencies.
It is not in the warranty interval if there are malfunctions not to follow the user
Ÿ
manual to operate or any illegal operation, such as short circuit, electronic shock,
broken lamp, etc.
WHITE
4.PHOTOMETRICS DIAGRAM
Lux
Height
5m
1100
4m
950
770 3m
460
2m
350
1m
240
0m
04