Adjusting The Playback Speed - The Dpc (Digital Pitch Control) Function - Sony ICD-UX512 Operating Instructions Manual

3
Press STOP to exit the menu mode.
x
To cancel the noise cut function
Select "OFF" in step 2.
To set the noise cut function in the
menu
Select and set "Noise Cut" from the
(Playback) tab of the menu.
Adjusting the playback
speed – the DPC (Digital
Pitch Control) function
Rear
Front
v , V
You can adjust the playback speed in a
range from 0.50 times to 2.00 times. The
file is played back in natural tones by
means of a digital processing function.
1
Slide the DPC(SPEED CTRL) switch to
"ON."
2
During playback, press
control button to adjust the playback
speed.
: Decreases the speed by 0.05 times
V
each time this button is pressed (from
×0.50 to ×1.00).
: Increases the speed by 0.10 times
v
each time this button is pressed (from
×1.00 to ×2.00).
When you press and hold each button,
you can change the speed continuously.
or on the
v V
47 GB