If The Ic Recorder Cannot Be Connected To A; Computer Directly, Use The Supplied Usb; Connection Support Cable - Sony ICD-UX512 Operating Instructions Manual

When the battery is fully charged, the
battery indicator will indicate "
3
Disconnect the IC recorder from your
computer.
Follow the procedures below; otherwise,
when the IC recorder contains data files,
the files may be damaged or become
unplayable.
Make sure that the operation indicator
1
does not light.
Perform the following operation on
2
your computer.
On a Windows screen, left-click the
icon at the bottom of the desktop of
the computer.
t Left-click "Eject IC
RECORDER."
The icon and menu displayed can be
different on different operating systems.
12 GB
."
Fully charged
indicator
On a Macintosh screen, drag "IC
RECORDER" on the desktop to
"Trash" and drop it there.
For details on disconnecting the IC
recorder from your computer, refer to the
operating instructions supplied with your
computer.
Disconnect the IC recorder from the
3
USB port of the computer, and slide
the USB slide lever in the direction of
the arrow to retract the USB DIRECT
connector.
1
* This is an approximation for the time it
takes to charge from no remaining battery
power to full battery power at room
temperature. It varies depending on the
remaining power and the condition of the
battery. It also takes more time if the
temperature of the battery is low, or if the
battery is charged while you are transferring
data to the IC recorder.
2
*

If the IC recorder cannot be connected to a

computer directly, use the supplied USB

connection support cable.