Operations - Alphasonik AKDJ8BAT Operating Instructions Manual

Operation
Before turning on the system:
- Turn the volume knob to minimum settings
- Connect the power connector to the corresponding power input
- This unit may be connected to another active Alphasonik speaker so that
multiple speakers can be connected and playing at the same time from
a single source. (Connect the RCA cable to the composite (RCA)
output of the main speaker and connect the other end of the composite
(RCA) cable to the secondary speaker's composite (RCA) input.
Male-to-Male Composite (RCA) cables is required -
not included & sold separately).
- Connect to a main power source
- Switch-On the audio source, then the unit
- Set the desired volume output on the unit
- Frequency adjustments can be made on the back panel.
(According to music)
Pairing a Bluetooth Device
The Alphasonik Speaker includes Bluetooth functionality, and as such, is configured
to automatically launch in "Discoverable Mode" upon launching the Bluetooth mode,
to make the device itself detectable by other Bluetooth-Enabled devices, such as a
mobile phone or tablet.
When in Discoverable mode, look for the device "Alphasonik", then
connect. No PIN is required to initially pair your device with the speaker.
Once your device indicates a "Connected" status with the speaker, you may now begin
streaming audio from your device.
You can also control the Playback functions by using your device.
To pair with another device, you must first "Un-pair" the last connected device. You can
also pair with a new device at startup.
www.alphasonik.com