Professional high power dj speaker system (16 pages)
Summary of Contents for Alphasonik PRO Venum Series
Page 1
Be Revolutionary. Be Alphasonik Amplified PRO DJ Speaker System Operating Instructions Please Retain Manual for Future Use and Reference www.alphasonik.com...
Today, the new Alphasonik is committed to pushing the envelope with regard to technology, quality and value. Our electronics feature audiophile parts and circuit topology designed to let the full musical experience come through, loud and clear.
Introduction Thank you for purchasing this Alphasonik product. This manual contains important information about installation, set-up procedures and integrating your new Alphasonik product into your audio setup. With proper care and installation, your new product will provide you with many years of high performance listening enjoyment. Before installing your new product, please read through the manual to fully understand the application.
— Use appropriate mounting brackets to avoid bodily harm — Protect from any water or liquids — Never try to repair unit yourself — Keep out of reach of children, as there is high voltage and could cause injuries. www.alphasonik.com...
(i.e. sandbags) on the base of the stand to improve stability. - Be cautious of where you place the speaker system, certain frequencies will cause the unit to vibrate the cabinet and move from it’s original position. www.alphasonik.com...
Turn the VOLUME controls down and turn the POWER switch to the ON position. • This unit may be connected to another active Alphasonik speaker so that multiple speakers can be connected and playing at the same time from a single source. (Connect the XLR cable to the XLR output of the main speaker and connect the other end of the XLR cable to the secondary speaker’s XLR input.
The switch is set at 110 Volts DEFAULT. 19. In the event that the protection fuse has blown, replace with the fuse with the same exact amperage installed from the factory. If a different amperage fuse is installed the warranty will be VOIDED. www.alphasonik.com...
Troubleshooting In the event that your Alphasonik speaker appears to require service, we ask that you first do a little troubleshooting to determine if the problem is actually the speaker, or a problem located in the area where the speaker was connected.
(Products purchased by consumers from an Authorized Alphasonik Dealer outside the United States are covered only by the Distributor of that specific country and are not covered by Alphasonik). You may inquire with Alphasonik to determine the corre- sponding authorized distributor in your country.
Page 14
- Any product that is new, and/or found to be in working condition - Burned Out Voice Coils caused by Neglectful Operation - L.E.D. indicators on electronics (Alphasonik will only replace L.E.D.(s) found to be defective at the time of purchase).
Page 15
Alphasonik. Any product found to have no manufacturer defect will be returned to the sender at their cost.
Page 16
Be Revolutionary. Be Alphasonik www.alphasonik.com...
Need help?
Do you have a question about the PRO Venum Series and is the answer not in the manual?
Questions and answers