Specifications - Fostex MR-16HD Service Manual

& Service Manual

1. SPECIFICATIONS

SPECIFICATION UNIT
REFERENCE LEVEL
< INPUT & OUTPUT >
ANALOG IN (A ~ D)
Connector
Input Level
Input Impedance
Reference Input Level
Phantom
INSERT (A)
Connector
Load Impedance
Reference Output Level
Input Impedance
Reference Input Level
STEREO OUT (L, R)
Connector
Reference Output Level
Load Impedance
AUX OUT (x 2)
Connector
Reference Output Level
Load Impedance
PHONES (x 2)
Connector
Load Impedance
Maximum Output Level
MIDI OUT
Connector
Format
FOOT SW
Connector
ON/OFF Level
Type
S/P DIF OUT
Connector
Format
4
0 dBV = 1.0 Vrms, 0 dBu = 0.775 Vrms
12 dB below full scale level
XLR-3-31 type (Pin-1: GND, Pin-2: Hot, Pin-3: COLD) / Ø 6 mm TRS
phone balanced (Inserting TRS phone jack breaks signal fed to XLR
connector.)
- 48 dBu (MIC) ~ + 4 dBu (LINE)
1.5 kΩ or more
400 kΩ or more (INPUT SW: GTR)
LINE + 4 dBu
MIC - 48 dBu
- 48 V, On/Off switchable by MENU setting. Fed to XLR connector
only.
Ø 6 mm TRS phone (Tip: output, Ring: Input, Sleeve: GND)
10 kΩ or more
- 10 dBV
10 kΩ or more
- 10 dBV
Ø 6 mm phone
- 10 dBV (Unbalanced)
10 kΩ or more
Ø 6 mm phone
- 10 dBV (Unbalanced)
10 kΩ or more
Ø 6 mm STEREO phone
16 Ω or more
50 mW or more at 32 Ω
DIN 5-pin
MIDI Standard
Ø 6 mm phone
TTL Level
Unlatched type
Optical
IEC60958 (S/P DIF)