Optional) Connecting Fe Communications Cables - Huawei SUN2000 Series User Manual

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL)
User Manual
Figure 5-34 Binding communications cables
Step 7 Use a torque wrench with an open end of 33 mm to tighten the locking cap to a torque of 7.5
N•m.
----End
Follow-up Procedure
Check that the cables are connected correctly and securely. Then seal the connectors.

5.5.3 (Optional) Connecting FE Communications Cables

Description
FE communication is mainly used in distributed rooftop scenarios with a small number of
inverters. The inverter can directly connect to the PC over the Ethernet to implement
monitoring networking.

Issue 11 (2019-06-08)
FE communication is optional for the SUN2000-36KTL. To use FE communication, contact local
technical support.
Figure 5-35 shows the communication mode for a single SUN2000.
Copyright © Huawei Technologies Co., Ltd.
5 Connecting Cables
64