HP EliteDesk 800 G2 Disassembly Instructions Manual page 2

including liquids, semi-liquids (gel/paste) and toner
Components and waste containing asbestos
Components, parts and materials containing
refractory ceramic fibers
Components, parts and materials containing
radioactive substances
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Screwdriver
Micro shear
Screwdriver
Description #4
Description #5
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Loose the screw and remove access panel.(see Figure 1 below)
2. Rotate the driver cage form the hook on slide rail.(see Figure 2 below)
3. Disconnect FIO cables from the MB.(see Figure 3-5 below)
4. Disconnect SATA cables from the MB.(see Figure 6 below)
5. Disconnect other PSU cables from the MB.(see Figure 7-11 below)
6. Remove HDD/ODD from chassis.(see Figure 12-20 below)
7. Remove the heatsink from MB.(see Figure 21-24 below)
8. Separate the fan from CPU heatsink.（see Figure 25-26 below）
9. Remove the CPU from the MB.(see Figure 27-28 below)
10. Remove the Memory card from the MB.(see Figure 29 below)
11. Remove the battery from the MB .(see Figure 30 below)
12. Remove M/B from chassis.(see Figure 31-32 below)
13. Remove front panel from chassis.(see Figure 33 below)
14. Remove FIO/Speaker/LED holder from chassis.(see Figure 34-36 below)
15. Remove PSU cover.(see Figure 37-43 below)
16. Disconnect all the cables and remove the Electrolytic Capacitors.(see Figure 44-47 below)
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00
Template Revision B
chambers, and service stations.
PSG instructions for this template are available at EL-MF877-01
Tool Size (if
applicable)
T-15
170II
PH1
Page 2