Wlan/Bluetooth Combo Card - HP ZHAN 66 Pro A 14 G3 Maintenance And Service Manual

WLAN/Bluetooth combo card

The computer uses a card that provides both WLAN and Bluetooth functionality.
Table 5-4 WLAN module description and part number
Description
Intel Dual Band Wireless-AC 9260 802.11ac 2 × 2 Wi-Fi + Bluetooth 5.0 Combo Adaptor (non-vPro)
Intel Wi-Fi 6 AX200 802.11ax 2 × 2 + Bluetooth 5.0 (non-vPro)
Before removing the WLAN module, follow these steps:
1. Prepare the computer for disassembly
2. Place the computer in Battery Safe mode
3. Remove the bottom cover
4. Remove the battery
Remove the WLAN module:
1. Disconnect the WLAN antenna cables (1) from the terminals on the WLAN module.
NOTE:
WLAN antenna cable labeled 2 connects to the WLAN module Aux terminal labeled 2. If the computer is
equipped with an 802.11a/b/g/n WLAN module, the yellow WLAN antenna cable connects to the middle
terminal on the WLAN module.
2. Remove the Phillips M2.0 × 2.5 screw (2) that secures the WLAN module to the computer. (The edge of
the module opposite the slot rises away from the computer.)
30 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Bottom cover on page
(Battery on page
The WLAN antenna cable labeled 1 connects to the WLAN module Main terminal labeled 1. The
(Preparation for disassembly on page
(Battery Safe mode on page
27).
28).
Spare part number
L16647-002
L35282-002
26).
26).