Changing The Fortigate Firmware; Upgrading To A New Firmware Version - Fortinet FortiGate FortiGate-60M Administration Manual

System status

Changing the FortiGate firmware

Upgrading to a new firmware version

FortiGate-60M Administration Guide
4 If you are logged in as an administrative user with read and write privileges or as the
admin user, you can select Delete to stop an active session.
FortiGate administrators whose access profiles contain system configuration read and
write privileges and the FortiGate admin user can change the FortiGate firmware.
After you download a FortiGate firmware image from Fortinet, you can use the
procedures listed in
Table 1: Firmware upgrade procedures
Procedure
Upgrading to a new
firmware version
Reverting to a
previous firmware
version
Installing firmware
images from a system
reboot using the CLI
Testing a new
firmware image before
installing it
Use the following procedures to upgrade the FortiGate unit to a newer firmware
version.
Upgrading the firmware using the web-based manager
Note: Installing firmware replaces the current antivirus and attack definitions with the definitions
included with the firmware release that you are installing. After you install new firmware, use the
procedure "To update antivirus and attack definitions" on page 123
and attack definitions are up to date.
1 Copy the firmware image file to your management computer.
2 Log into the web-based manager as the admin administrative user.
Note: To use this procedure you must login using the admin administrator account, or an
administrator account that has system configuration read and write privileges.
Table 1 to install the firmware image on your FortiGate unit.
Description
Use the web-based manager or CLI procedure to upgrade to a new
FortiOS firmware version or to a more recent build of the same
firmware version.
Use the web-based manager or CLI procedure to revert to a
previous firmware version. This procedure reverts the FortiGate
unit to its factory default configuration.
Use this procedure to install a new firmware version or revert to a
previous firmware version. To use this procedure you must connect
to the CLI using the FortiGate console port and a null-modem
cable. This procedure reverts the FortiGate unit to its factory
default configuration.
Use this procedure to test a new firmware image before installing it.
To use this procedure you must connect to the CLI using the
FortiGate console port and a null-modem cable. This procedure
temporarily installs a new firmware image using your current
configuration. You can test the firmware image before installing it
permanently. If the firmware image works correctly you can use
one of the other procedures listed in this table to install it
permanently.
01-28007-0144-20041217
Changing the FortiGate firmware
to make sure that antivirus
33