Samsung NX58F5700WS User Manual page 67

Maintaining your appliance
Before a self-cleaning cycle
NOTE
Remove the racks. Leaving the oven racks in the oven during a self-cleaning cycle
will discolor the oven racks and make them difficult to slide in and out of position.
WARNING
Do NOT use the surface burners while the oven is operating in the self clean mode.
Before a self-cleaning, check whether the door is locked.
• Make sure the door lock feature is
turned off and the oven is cool. If they
are not, the self-cleaning cycle will not
start.
• Make sure the warming drawer is
turned off. Self-clean will not start when
the drawer is on.
• A blinking Lock icon indicates the oven
door is in the process of being locked.
• When the Lock icon is on, the oven door
is locked.
How to set the oven for self-cleaning
• When Loc is shown in the display, it
indicates the door lock feature is on.
Press and hold the Start/Set pad for
3 seconds to unlock the oven controls.
1. Make sure the oven door is completely
closed.
2. Press the Self Clean pad on the oven
control panel.
Press the pad once for a 2-hour cleaning
cycle, twice for a 3-hour cleaning cycle,
or three times for a 4-hour cleaning
cycle.
Pressing the pad a fourth time will
reselect the 2-hour default time.
The display will show Clean, and the
selected cleaning cycle time.
English 67