Connecting - Siemens SIMATIC BusAdapter Manual

BusAdapter BA SCRJ/RJ45

9.2 Connecting

9.2 Connecting
Installing the bus connector
Install the PROFINET connector in accordance with the instructions in the PROFINET
Installation Guide (https://www.profibus.com/).
Connecting the SCRJ connector
You can find more information about the required tools, accessories, requirements and
procedures in the section Connecting BusAdapter BA 2×SCRJ (Page 28).
Connecting the RJ45 connector
You can find more information about the required tools, accessories and procedures in the
section Connecting BusAdapter BA 2×RJ45 (Page 15).
Pin assignment
The following table shows the signal names and description of the pin assignment for the
BusAdapter BA SCRJ/RJ45:
Table 9- 1
50
PROFINET IO pin assignment with BusAdapter BA SCRJ/RJ45
View Signal name
① Receive Data
② Transmit Data
1 TD Transmit Data +
2 TD_N Transmit Data -
3 RD Receive Data +
4 TERM1 Termination Network 1
5 TERM1 Termination Network 1
6 RD_N Receive Data -
7 TERM2 Termination Network 2
8 TERM2 Termination Network 2
Equipment Manual, 08/2020, A5E41449003-AB
Description
BusAdapter