Epson Pro Cinema 6050UB User Manual page 116

Setting
Direct Power On
Sleep Mode
Sleep Mode Timer
Illumination
Trigger Out
High Altitude Mode
Note: The Reset setting does not reset the Memory, Projection, High Altitude Mode, Standby Mode
or Language settings.
Parent topic: Adjusting the Menu Settings
Related concepts
Projection Modes
Related references
Available Image Aspect Ratios
Related tasks
Using the Home Screen
Selecting External Network Detection Settings
Using Picture in Picture
Adjusting the Color Convergence (Panel Alignment)
Connecting to a Trigger Out Port
Description
Turns on the projector when you plug it in
Automatically places the projector in standby mode after an
interval of inactivity
Sets the time before the projector automatically turns off (Sleep
Mode must be turned on)
Turns off the status indicator lights on the projector
Outputs a DC 12V signal at 200 mA maximum from the 3.5 mm
mini-jack Trigger Out port whenever the projector is turned on.
If you select Anamorphic Wide as the Trigger Out setting,
voltage is only output from the Trigger Out port when the
Aspect setting is set to Anamorphic Wide or Horiz. Squeeze
(Pro Cinema 6050UB).
Regulates the projector's operating temperature at altitudes
above 4921 feet (1500 m)
116