Table of Contents
Advertisement
• To remove dust or smudges, gently move the shutter to the side and wipe the lens with lens-cleaning
paper. After cleaning, close the shutter.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the
lens. Do not spray any liquid directly on the lens.
Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the
projector lamp may cause a fire.
Caution: Do not use glass cleaner or any harsh materials to clean the lens and do not subject the lens
to any impacts; you may damage it. Do not use canned air, or the gases may leave a residue. Avoid
touching the lens with your bare hands to prevent fingerprints on or damage to the lens surface.
Parent topic:
Cleaning the Projector Case
Before cleaning the projector case, turn off the projector and unplug the power cord.
Note: If the projector has been in use, wait 30 minutes before cleaning it.
• To remove dust or dirt, use a soft, dry, lint-free cloth.
• To remove stubborn dirt, use a soft cloth moistened with water and mild soap. Do not spray liquid
directly on the projector.
Caution: Do not use wax, alcohol, benzine, paint thinner, or other chemicals to clean the projector
case. These can damage the case. Do not use canned air, or the gases may leave a flammable
residue.
Parent topic:
Cleaning the 3D Glasses
To remove dust, dirt, smudges, or fingerprints from the glasses, use a soft, dry, lint-free cloth.
Projector Maintenance
Projector Maintenance
124
Advertisement
Table of Contents
