Ip & Mac Binding - TP-Link Archer AX50 User Manual

Chapter 9
9. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device's IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to a device with matching IP address in
the Binding list, but unrecognized MAC address.
I want to:
Prevent ARP spoofing and ARP attacks.
How can I do that?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced
3. Enable IP & MAC
4. Bind your device(s) according to your need.
• To bind the connected device(s):
Click to add the corresponding device to the
• To bind the unconnected device:
1 ) Click Add in the
2 ) Enter the MAC address
for this binding entry.
3 ) Tick the Enable This Entry
Done!
Now you don't need to worry about ARP spoofing and ARP attacks!
> Security > IP & MAC
Binding.
Binding List section.
and IP address
checkbox and click OK.
Binding.
Binding List.
that you want to bind. Enter a
Network Security
Description
47