Beurer EM 28 Instructions For Use Manual page 25

Wrist tens
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
Connecting the connection cable and position­
ing the wrist cuff
1. Connect the connection cable
with the metallic connection clips
on the wrist cuff.
Note
Before positioning the wrist cuff, first clean the body
parts to be treated.
Before positioning the wrist cuff, first moisten
the water contact electrodes and the wrist with
water.
Slip your arm into the cuff to position the cuff on your
wrist/lower arm. To position it more easily, please first
brace your arm against your upper body so that you have
a counter pressure and can then subsequently tighten
the cuff more easily.
For use on the right arm: If you have placed the cuff
on the right wrist/lower arm, please pull both straps
diagonally downwards.
For use on the left arm: If you have placed the cuff on
the left wrist/lower arm, please pull both straps diago-
nally upwards.
2. Fix the cuff in the desired position using the buckle
fasteners. Ensure that the cuff is not too tight but that
the water contact electrodes still have sufficient con-
tact with the skin.
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

64708

Table of Contents