Table of Contents
Advertisement
Configuring RADIUS support
Configuring RADIUS support
Adding RADIUS servers
Deleting RADIUS servers
148
If you have configured RADIUS support and a user is required to authenticate using a
RADIUS server, the FortiGate unit contacts the RADIUS server for authentication.
This section describes:
•
Adding RADIUS servers
•
Deleting RADIUS servers
To configure the FortiGate unit for RADIUS authentication:
1
Go to User > RADIUS.
2
Select New to add a new RADIUS server.
3
Enter the name of the RADIUS server.
You can enter any name. The name can contain numbers (0-9), uppercase and
lowercase letters (A-Z, a-z), and the special characters - and _. Other special
characters and spaces are not allowed.
4
Enter the domain name or IP address of the RADIUS server.
5
Enter the RADIUS server secret.
6
Select OK.
Figure 18: Example RADIUS configuration
You cannot delete RADIUS servers that have been added to user groups.
1
Go to User > RADIUS.
2
Select Delete
3
Select OK.
beside the RADIUS server name that you want to delete.
Users and authentication
Fortinet Inc.
Advertisement
Table of Contents
