Fortinet FortiGate FortiGate-3810A Install Manual page 43

Fortios 3.0 mr6

Hide thumbs Also See for FortiGate FortiGate-3810A:

Table of Contents

AMC modules

FortiGate-3810A FortiOS 3.0 MR6 Install Guide

01-30006-0456-20080131

For these multi-mode SFP interfaces, SerDes is the default mode. You can use a

CLI command to change the interface to operate in SGMII mode.

Depending on the type of transceivers you install, you need to configure the

FortiGate unit or module for the transceiver using the CLI. Use the mediatype

keyword of the config system interface CLI command to change the

interfaces to either SerDes or SGMII mode.

Using the AMC modules

Table of Contents

Need help?

Do you have a question about the FortiGate FortiGate-3810A and is the answer not in the manual?