To Enable Traffic Logging For A Firewall Policy - Fortinet FortiGate FortiGate-3000 Administration Manual

Log & Report
FortiGate-3000 Administration Guide

To enable traffic logging for a firewall policy

You can enable traffic logging for a firewall policy. All connections accepted by the
firewall policy are recorded in the traffic log.
1 Go to Firewall > Policy.
2 Select the Edit icon for a policy.
3 Select Log Traffic.
4 Select OK.
5 Make sure you enable traffic log under Log Filter for a logging location and set the
logging severity level to Notification or lower.
01-28006-0010-20041105
Log config
367