Maintenance - Husqvarna 436LiB Operator's Manual

3. Unplug the backpack battery cable from the product
.
Note: If the backpack battery is not used for more than
30 minutes, the backpack battery turns off automatically.
To start the backpack battery again, press the start
button on the backpack battery.
To set the optimal airflow for your work
1. Press the power trigger to choose the optimal airflow
for your work.
2. Press the cruise control button to set the chosen
airflow, the LED comes on.
Introduction
WARNING: Before you do any maintenance
work you must read and understand the
safety chapter.

Maintenance

Clean the outside of the machine with a clean and dry cloth. Never use water.
Keep handles dry, clean and free from oil and grease.
519 - 002 - 30.05.2018
3. Continue to work without needing to press the power
trigger.
4. Press the cruise control button again to deactivate
the cruise control function.
To temporarily increase the airflow
1. Start the product. See
10 .
2. Press and hold the boost button to get the maximum
airflow, the LED comes on.
a) 536LiB, 530iBX has unlimited boost time.
b) 436LiB has a limited boost time of 30 seconds.
Release and press the boost button again.
3. Release the boost button to use the product with
normal air flow.
Maintenance
Maintenance schedule
The following is a list of the maintenance steps that you
must do on the product.
To start the product on page
WARNING: Remove the battery before you
do maintenance.
Daily Weekly
X
X
Monthly
11