Transparent Mode Installation; Preparing To Configure Transparent Mode; Using The Web-Based Manager - Fortinet FortiGate FortiGate-3000 Install Manual

Fortios 3.0mr4
Hide thumbs Also See for FortiGate FortiGate-3000:
Table of Contents

Advertisement

Transparent mode installation

Transparent mode installation

Preparing to configure Transparent mode

Using the web-based manager

44
For the DMZ network, change the default gateway address of all computers
and routers connected directly to your DMZ network to the IP address of the
FortiGate DMZ interface.
If you are using the FortiGate unit as the DHCP server for your internal network,
configure the computers on your internal network for DHCP.
Make sure the connected FortiGate unit is functioning properly by connecting to
the Internet from a computer on the internal network. You should be able to
connect to any Internet address.
This section describes how to install the FortiGate unit in Transparent mode. This
section includes the following topics:
Preparing to configure Transparent mode
Using the web-based manager
Using the front control buttons and LCD
Using the command line interface
Connecting the FortiGate unit to your network
Use
Table 14 on page 44
to gather the information you need to customize
Transparent mode settings.
You can configure Transparent mode using one of the following three methods:
the web-based manager GUI
the front control buttons and LCD
the command line interface (CLI)
The method you choose depends on the complexity of the configuration, access
and equipment, and the type of interface you are most comfortable using.
Table 14: Transparent mode settings
Administrator Password:
IP:
Netmask:
Default Gateway:
Management IP
The management IP address and netmask must be valid for the
network from which you will manage the FortiGate unit. Add a default
gateway if the FortiGate unit must connect to a router to reach the
management computer.
Primary DNS Server:
DNS Settings
Secondary DNS Server:
You can use the web-based manager to complete the initial configuration of the
FortiGate unit. You can continue to use the web-based manager for all FortiGate
unit settings.
FortiGate-3000 and FortiGate-3600 FortiOS 3.0MR4 Install Guide
Configuring the FortiGate unit
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
_____._____._____._____
01-30004-0270-20070215

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fortigate-3600Fortios 3.0mr4

Table of Contents