Factory Default Transparent Mode Network Configuration - Fortinet FortiGate FortiGate-200A Install Manual

Factory default Transparent mode network configuration

28
Table 8: Factory default NAT/Route mode network configuration
Administrator
account
Port 1
Port 2
WAN1 (200A)
Port 4
DMZ (200A)
Network settings
In Transparent mode, the FortiGate unit has the default network configuration
listed in Table 9.
Table 9: Factory default Transparent mode network configuration
Administrator
account
Management IP
DNS
Administrative access
FortiGate-200A, FortiGate-300A, FortiGate-400A, and FortiGate-500A FortiOS 3.0 MR4 Install Guide
User name:
Password:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
IP:
Netmask:
Administrative Access:
Default gateway (for default route)
Default Route
A default route consists of a default gateway and the name of
the interface connected to the external network (usually the
Internet). The default gateway directs all non-local traffic to this
interface and the external network.
Primary DNS Server
Secondary DNS Server
User name:
Password:
IP:
Netmask:
Primary DNS Server:
Secondary DNS Server:
Port 1
Port 4
DMZ
WAN1
Factory defaults
admin
(none)
192.168.1.99
255.255.255.0
HTTPS, Ping
192.168.100.99
255.255.255.0
Ping
10.10.10.1
255.255.255.0
HTTPS, Ping
192.168.100.1
65.39.139.53
65.39.139.63
admin
(none)
0.0.0.0
0.0.0.0
65.39.139.53
65.39.139.63
HTTPS, Ping
Ping
HTTPS, Ping
Ping
01-30004-0268-20070712